Previously the CEO of NIC, Inc., Jeffery Scott Fraser has since invested in Job Pose, which matches employers with qualified job seekers, and owns the Tsaina Lodge. Away from his work, Jeffery S. Fraser is a keen snowboarder.
Regular waxing of a snowboard ensures it enjoys a longer life and runs quickly across the surface of the snow. To complete the job, you will need an iron, some wax, a cloth, a scraper, a scouring pad, and a structuring brush.
Start by removing the board’s bindings, as the metal screws used to attach them will heat up under the iron if left in place, then scour the board and use your cloth to remove any excess grime.
Next, turn your iron up to medium heat and use it to melt the wax onto the board. Aim to create a steady drip of wax that you can manipulate onto the edges of the board before creating a zig-zag pattern up the middle. From there, place the iron on the board’s base and begin moving it in a circular motion, making sure to cover the entire base to create an even coating of wax. Do not hold the iron in one place for too long, as this will damage the board.
Allow the wax to cool for approximately half an hour before using your scraper to scrape it off the board, paying particular attention to any accumulations of wax around the edges. Finally, use your structuring brush to apply a firm brushing to the entire board from tail to nose, thus removing any remnants of wax.
The former CEO of NIC, Inc., Jeffery Scott Fraser now splits his time between living in Wyoming and Alaska. In his free time, Jeffery S. Fraser enjoys snowboarding.
When out on the mountain, showing the proper etiquette will not only help you have a good time, but it will prevent your lack of experience from ruining someone else’s trip. Follow these three tips to remain courteous and ensure a pleasant time for all involved.
1. Slow Down in Crowded Areas - When entering a crowded area, watch your speed and your surroundings to help prevent an accident. These areas will have snowboarders of all skill levels, so go slow and be prepared for a beginner to make an unexpected move into your path.
2. Right of Way - When riding down a mountain, anybody in front of you has the right of way. Regardless of what they are doing, it is your responsibility to keep your distance and avoid a collision, as boarders in front of you cannot see you coming up behind them.
3. Lift Traffic - Once you reach the top of the lift, make it your immediate priority to move out of the way and give the next group coming up plenty of room for an easy dismount.
Retired technology executive Jeffery Scott Fraser currently serves as the owner of Tsaina Lodge in Valdez, Alaska. When he isn’t working at his Alaska-based lodge, Jeffery S. Fraser enjoys fishing.
Ice fishing differs from traditional fishing in a number of ways. One of the most significant differences is that ice fishing requires some extra equipment compared to freshwater and deep sea fishing. Here are some of the things you’ll need to get started as an ice fisherman.
Perhaps the most important piece of equipment you will need is an auger, the tool that creates the hole in the ice through which you will fish. This piece of equipment comes in a variety of sizes and can even be rented. For the beginner, it’s best to choose a manual-style auger that will cut a hole between 6 and 8 inches in diameter.
In terms of basic fishing hardware, look for a rod and reel that feel stiff and sturdy in your hands. Because you will be fishing for lake trout, walleye, perch, and other similarly sized fishes, it’s essential to purchase 8-pound line for your pole.
In terms of bait, it’s common to use minnows, as they tend to be the best attractors. Most bait shops will carry them, but if you want to trap your own, you can purchase a minnow trap.
As the owner of Tsaina Lodge in Alaska, Jeffery Scott Fraser makes fine dining, spa services, and unique outdoor adventures available to his guests. Like many Alaskans, Jeffery Fraser goes snowboarding whenever possible.
In 2016, snowboards began to take on some traits characteristic of the surfboard. In order to increase their efficiency on fresh powder, boards widened at the nose and tapered at the tail.
Board makers are doubling down on this design trend for 2017, and several brands have collaborated with the surfboard industry's top talent. Many boards feature a large concave nose, and contours along the bottom have become commonplace. Increasingly flashy swallowtails have become the norm as well, allowing snowboarders to feel weightless in fresh powder.
The surf-inspired trend has carried over into aesthetic components of new snowboards as well. Natural wood is back in fashion, and wave-inspired motifs have been making a prominent comeback in many brands' 2017 lineups.
Jeffery Scott Fraser has served in various capacities at companies such as AT&T, Foot Locker, Webber Real Estate, and NIC, Inc. Now retired and the owner of Tsaina Lodge in Valdez, Alaska, Jeffery S. Fraser enjoys snowboarding.
Professional snowboarders prep their bodies for the snow season while remaining fit. Dynamic warm-up exercises can help snowboarders get the best out of every workout.
Dynamic warm-up exercises, such as corrective, mobility, and activation exercises, are geared toward improving mobility and overcoming postural imbalances and readying the body for other exercises.
Corrective exercises improve hip movement, in turn bettering one’s snowboard technique. Many snowboarders tend to move from their lumbar spine rather than the hips, increasing the risk of back injury. One example of a corrective exercise is the barbell deadlift.
Mobility exercises such as squats enhance full-range motion movement, improving movement patterns down the slope. This makes the downward ski much easier and less energy draining.
Activation exercises turn on underutilized muscles in preparation for snowboarding. For example, a majority of people who are quadriceps dominant tend to underutilize their glutes. This leads to inefficient movement down the slopes. Glute activation exercises such as the glute bridge activate the muscles, allowing them to play a greater role in snowboarding.
Jeffery Scott Fraser retired from his career as an information systems executive in 2008 and splits his time between Wyoming and Alaska, where he co-manages the Tsaina Lodge at the Thompson Pass near Valdez. In his spare time, Jeffery S. Fraser enjoys snowboarding, a winter sport that evolved from applying the principles of skateboarding and surfing to snowy terrain. Snowboarders are advised to make safety a top priority, and the following list details some important safety tips for the sport.
1. Wear proper gear. Proper safety equipment can save lives on the slope, and snowboarders should ensure that their gear fits securely. A complete set of safety gear includes helmets, wrist protection, goggles, and pads for the knees, elbows, hips, and buttocks. Additionally, snowboarders must remember to purchase gear specifically designed for snowy conditions.
2. Take lessons if inexperienced. Becoming a good snowboarder requires instruction and practice, and inexperienced and beginning snowboarders may want to take lessons from a qualified instructor before hitting the slopes. Not only will it help with the basics, but lessons will also include important safety information and advance current skills.
3. Stay hydrated. Becoming dehydrated can lead to fatigue, so remember to drink lots of water throughout the day. Higher altitudes can also accelerate dehydration, making hydration exceptionally important.
4. Prepare for an emergency. A number of factors can contribute to the emergence of emergency situations without warning, such as unexpected weather changes and injuries. Backcountry and side country slopes also put considerable distance between snowboarding locations and ski lodges. Prepare for emergencies by carrying a reliable communication device, snowboarding with a friend, and keeping ski patrol contact information on hand.
5. Remember common-sense slope rules. The National Safety Council maintains that all snowboarders should remember and follow a list of six common sense rules, some of which this list already covers. Additional points include following all posted signs and rules, avoiding closed trails, and giving moving snowboarders and skiers located downhill the right-of-way.
Jeffery Scott Fraser started NIC Inc. as a consortium to help companies get business from the government through convenient applications. Now retired after 18 years as CEO of NIC, Jeffery S. Fraser enjoys paragliding.
A harness connects you to your glider. When you hit a hard landing after a bad launch, your harness is your back’s last line of defense. There are two options when considering protective gear: airbags or foam.
Many harnesses have one or two airbags fitted inside them. These weigh less than foam and are less bulky, making them a good option for long uphill climbs. Previously, airbags had trouble inflating fully before impact. However, with technological advancements, airbags are made to inflate automatically once ejected from the bag.
Foam, on the other hand, is the more effective back protector during side landings. Foam protectors are made from heavier material, offering superior protection and impact dampening. Additionally, many foam protectors are zipped into the harness, ensuring protection from damage.
Jeffery Scott Fraser founded the National Information Consortium and Kansas Information Consortium in the 1990s as companies that provided individual and corporate clients with efficient ways of interacting with the government via the Internet.